Need a repair? Call us today!

"iFiX, so you don't have to!"

Dryer

Signs You Need Your Dryer Repaired

Table of Contents

Are you having issues with your dryer? We get it. It’s never fun to have your appliances break down. It may seem easier to avoid the problem altogether, but it’s important to pay attention and understand when it’s time to call a professional appliance repair company.

Read below for the telltale signs your dryer needs to be repaired.

Dryer Repair Signs

It’s making loud noises.

If your dryer is making unusually loud noises, it most likely needs to be inspected. Of course, putting in bulky items like shoes can lead to loud thumping noises. However, if the noises continue with normal loads, this is a sign something is wrong. Typically, loud noises mean that your dryer belt is loose. If you leave it unchecked, it could break.

Your clothes aren’t drying.

Is your dryer taking multiple cycles to dry? This could be a sign that there is a clog in the dryer vent. These clogs can cause your dryer to take multiple cycles to dry due to obstructions in the vent duct. When you clear out internal clogs, you can help to prevent damage from occurring to your dryer while allowing your clothes to dry faster. 

It’s also possible that you’re overfilling your dryer, so make sure to load it properly. Unfortunately, if these tips don’t help, there’s most likely a deeper issue going on. A repair technician will be able to tell you if you have a problem with your belt, a broken sensor, an electrical problem, or a combination of all three.

There’s a burning smell.

It’s always scary when your appliances start giving off a burning smell. In most cases, a burning smell can be a result of clogged dryer vents. Dryer vents that become clogged are likely to become fire hazards that can lead to substantial problems with your home. You can thoroughly clean your dryer vents on a regular basis or consult with a professional dryer vent cleaning service.

Faulty Appliande?

It’s leaking.

Most homeowners think their washing machine is the only appliance that can leak, but your dryer can do it too. The most common reason for this is due to blocked vents from lint build up. When it’s clogged, the hot, wet air has nowhere to go and so it causes condensation, resulting in a leak.

It’s shaking.

Excessive vibrations and ratting are a clear sign that your dryer isn’t properly leveled. Shaking and rattling will not only lead to future issues, but it can also damage the surrounding walls and floors. Fortunately, this is a simple fix. Start by using a carpenter’s bubble level to see if it’s level. If the bubble doesn’t center itself, you have some adjusting to do. First, adjust each leg to the proper height. We recommend keeping the machine as close to the floor as possible. The lower it is, the less likely it is to vibrate. Tighten the lock nuts against the body of the machine to prevent the leg from rotating. Finally, lean against the appliance to make sure it doesn’t rock back and forth. 

If the washer continues to vibrate, consider inspecting the laundry room floor and double checking that the screws are tight. 

Schedule Dryer Repair in Utah Today

We offer a variety of services when it comes to dryer repair. Whether you’re having issues with rattling, burning, or loud noises, our expert appliance repair technicians can troubleshoot and solve the problem. We work hard to provide our customers with the best appliance repair experience possible. If you’ve given your home appliances TLC and they’re still malfunctioning, give iFiX a call today for all your appliance repair needs this spring.

Share:

Facebook
Twitter
Pinterest
LinkedIn

Leave a Reply

On Key

Related Posts

miele appliance repair

DIY Solutions to Miele Appliance Problems

As a high-end appliance manufacturer, Miele creates efficient and long-lasting appliances, including ranges, ovens, range hoods, microwaves, refrigerators, freezers, dishwashers, washers, dryers, and more. While

Miele Dishwasher Repair

How to Fix a Miele Dishwasher

Miele’s dishwashers offer heavy-duty performance and even go through strict stress and endurance tests before they go to market, making them excellent, durable options for