Miele is a powerhouse brand known for making high-performing appliances, including ovens, stovetops, and ranges. However, even the best appliances can experience issues from time to time. If you’re having problems with your Miele range, there are a few things you can troubleshoot before calling in a professional for Miele appliance repair.
Deep Clean Your Stove
One of the most common problems with stoves is a build-up of grime and debris. This can cause the stove to work less efficiently or even stop working altogether. Before you start getting into the nitty-gritty of electrical components, it’s a good idea to give your stove a deep cleaning. Cleaning your stove will not only improve its performance, but it will also make it easier to see if any other issues need to be addressed. Soak all the parts in warm, soapy water to loosen the food and grime. Make sure to scrub all the parts carefully with a non-abrasive dish pad.
Inspect the Stove’s Element
The element, also known as the burner, is the coiled portion of the stove that you see on the surface. Each element on the stovetop is connected to a separate circuit. When the temperature dials are adjusted, a certain amount of voltage and heat flow through the receptacle and into the corresponding burner. The electricity will repeatedly turn on and off to maintain the selected temperature.
To check if the problem with your stove element is electrical:
- Turn off the power at the breaker.
- Remove the element from the stove and inspect the terminals (two extensions at the end of the coil).
- If they appear dirty, give them a thorough cleaning. If they look damaged, you’ll want to replace the element altogether.
To ensure proper installation, consider hiring a professional instead of purchasing a replacement kit. On the other hand, if the element seems fine, the issue may be with the receptacle.
Check the Stove’s Heating Receptacle
Another issue that can cause problems with your range is a faulty heating receptacle. This part of the stove connects the element to the power source. If this part is defective, the stove won’t work properly. Before checking the heating receptacle, make sure the range is unplugged and the element is cool. Next, lift the stovetop and locate the receptacles connected with wires at the edge of the element area. Inspect the plastic casing for cracks, melting, or discoloration, and replace it if necessary.
Deep Clean Your Oven
As we mentioned before, one of the most important things you can do to keep your Miele range running efficiently is to give it a deep clean. Food spills, grease, and grime can accumulate over time, causing your oven to work less efficiently and potentially causing additional damage. To deep clean your oven, start by removing the racks. Then, mix warm water and mild detergent to wipe down the oven’s interior. Be sure to pay extra attention to the areas around the heating elements and the door seal.
Check the Oven’s Sensor
Another important step in Miele range repair is to check the oven’s sensor. The sensor is responsible for measuring the temperature inside your oven and communicating that information to the control panel. If the sensor isn’t working correctly, your oven may not heat to the correct temperature. To check if the sensor is accurate, use a digital thermometer to measure the temperature inside the oven. Then, compare this reading to the temperature indicated on the control panel. The sensor may need to be replaced if there is a significant difference.
Avoid the Self-Clean Cycle
While the self-clean cycle may seem easy to keep your oven clean, it’s not recommended for Miele ovens (or any other ovens). This is because the high heat of the self-clean cycle can cause damage to the interior of the oven, including the warping of the door seal. Instead, we recommend cleaning your oven manually using the method described above.
Miele Appliance Repair Pros
Regular maintenance can go a long way in keeping your Miele range running efficiently for years to come. If you have any issues with your Miele range that you can’t solve, be sure to call a professional to take a look. iFiX has experience dealing with all types of appliance problems on various brands, including Miele. Don’t waste your time trying to fix it yourself. Let iFiX take care of it. Contact us today to schedule a Miele appliance repair and get your daily routine back on track.